MEDIEVAL BUTCHERS

User avatar
William
Minotaur Lord
Minotaur Lord
Posts: 4034
Joined: Tue Mar 16, 2010 6:59 am
Location: Kent, WA

Re: MEDIEVAL BUTCHERS

Post by William » Tue Oct 15, 2019 6:34 am

Oldent wrote:
Sun Oct 13, 2019 10:13 am
William wrote:
Sat Oct 12, 2019 9:36 pm
That's exactly the idea, thanks for the pre-trials. :D

I just got my Mimbleberry pies last night, along with the little nightmares. ;)
I like the tiny baddie in the stocks, but the back side where his neck should be, looks 'off'. :?:
I hope it is not miscast :!:
I think it's a good cast, just that the holes for the head and wrists don't line up well. On the backside they are all below the top board, but show as if the holes are sloped upward to the front face. I think he needed to lower the stock and have the mini bend more. It's just weird to look at, no biggie. ;)
Sir William of the Basalt Region of Mythras
( aka: Rock Breaker Bill - Column Barron of BRoM )

User avatar
Rabbit Burner
Minotaur Lord
Minotaur Lord
Posts: 3814
Joined: Tue Mar 08, 2016 5:14 am
Location: Flaming bunny Warren, Valoria

Re: MEDIEVAL BUTCHERS

Post by Rabbit Burner » Mon Oct 14, 2019 8:43 am

Butchers the lot of you!

Apart from the deliberate killing and skinning of innocent bunnies - nice work :)
Mythrassian Lagomorph Hivemind Minion of the Flaming Bunny Clan

User avatar
Oldent
Minotaur Lord
Minotaur Lord
Posts: 2769
Joined: Sat Feb 14, 2015 5:28 pm

Re: MEDIEVAL BUTCHERS

Post by Oldent » Sun Oct 13, 2019 10:13 am

William wrote:
Sat Oct 12, 2019 9:36 pm
That's exactly the idea, thanks for the pre-trials. :D

I just got my Mimbleberry pies last night, along with the little nightmares. ;)
I like the tiny baddie in the stocks, but the back side where his neck should be, looks 'off'. :?:
I hope it is not miscast :!:
OldmanWillow AKA OldEnt. Customer and fan from 1996 onward!

User avatar
William
Minotaur Lord
Minotaur Lord
Posts: 4034
Joined: Tue Mar 16, 2010 6:59 am
Location: Kent, WA

Re: MEDIEVAL BUTCHERS

Post by William » Sat Oct 12, 2019 9:36 pm

That's exactly the idea, thanks for the pre-trials. :D

I just got my Mimbleberry pies last night, along with the little nightmares. ;)
I like the tiny baddie in the stocks, but the back side where his neck should be, looks 'off'. :?:
Sir William of the Basalt Region of Mythras
( aka: Rock Breaker Bill - Column Barron of BRoM )

User avatar
Oldent
Minotaur Lord
Minotaur Lord
Posts: 2769
Joined: Sat Feb 14, 2015 5:28 pm

Re: MEDIEVAL BUTCHERS

Post by Oldent » Sat Oct 12, 2019 1:22 pm

I have not started on the resin butcher yet.

Image

Williams clear plastic bracket idea will work for the hanging birds and rabbits too.
The reaper bar tender will stand in for the butcher.
OldmanWillow AKA OldEnt. Customer and fan from 1996 onward!

User avatar
Oldent
Minotaur Lord
Minotaur Lord
Posts: 2769
Joined: Sat Feb 14, 2015 5:28 pm

Re: MEDIEVAL BUTCHERS

Post by Oldent » Sat Oct 12, 2019 11:49 am

William wrote:
Fri Oct 11, 2019 7:14 pm
I'm thinking about making some form of clear or thin hook system for the wall meat racks. I still need to noodle it out, but I'm looking for a plastic package I can hack up. It's the shape that's hard to find. A 3/8" 'U' joint in clear is not a typical shape. ;)
Hot water plastic adapter.

Image

I used a miniature plastic package.I found one with a right angle, I cut a strip.

Image

I did not have a dowel the correct size so I formed the plastic over the wall section. I could have used a wider strip of plastic and made all of the brackets at once. You can trim the plastic to any size you like. I used boiling water in a cup. You do not need ice water. Tap water will reset the plastic.

Image

If I trim the plastic to fit the space between the boards it will be almost invisible.

I hope this was helpful.
OldmanWillow AKA OldEnt. Customer and fan from 1996 onward!

User avatar
kitenerd
Minotaur Lord
Minotaur Lord
Posts: 3524
Joined: Mon Apr 29, 2013 3:47 pm
Location: Redwood Empire

Re: MEDIEVAL BUTCHERS

Post by kitenerd » Fri Oct 11, 2019 11:53 pm

Nice paint jobs William - i like the headless armless butcher and the very creepy chopping table with a head and disembodied arms... that was a whole nightmare room encounter... almost a shame you put him together ;)
"Miniatures?, sure sign of a petty mind!" - 'The Women' 1939

User avatar
Oldent
Minotaur Lord
Minotaur Lord
Posts: 2769
Joined: Sat Feb 14, 2015 5:28 pm

Re: MEDIEVAL BUTCHERS

Post by Oldent » Fri Oct 11, 2019 9:21 pm

William wrote:
Fri Oct 11, 2019 7:14 pm
I'm thinking about making some form of clear or thin hook system for the wall meat racks. I still need to noodle it out, but I'm looking for a plastic package I can hack up. It's the shape that's hard to find. A 3/8" 'U' joint in clear is not a typical shape. ;)
:idea: Take a 3/8 square dowel rod and shape the plastic in hot water. Then chill the plastic in tap water.A round dowel will most likely work too.
OldmanWillow AKA OldEnt. Customer and fan from 1996 onward!

User avatar
William
Minotaur Lord
Minotaur Lord
Posts: 4034
Joined: Tue Mar 16, 2010 6:59 am
Location: Kent, WA

Re: MEDIEVAL BUTCHERS

Post by William » Fri Oct 11, 2019 7:14 pm

I'm thinking about making some form of clear or thin hook system for the wall meat racks. I still need to noodle it out, but I'm looking for a plastic package I can hack up. It's the shape that's hard to find. A 3/8" 'U' joint in clear is not a typical shape. ;)
Sir William of the Basalt Region of Mythras
( aka: Rock Breaker Bill - Column Barron of BRoM )

User avatar
Oldent
Minotaur Lord
Minotaur Lord
Posts: 2769
Joined: Sat Feb 14, 2015 5:28 pm

Re: MEDIEVAL BUTCHERS

Post by Oldent » Fri Oct 11, 2019 6:51 pm

Cool,William 8-)

I have not done more yet. I like what you did with the fat at the edge.
I did decide to use a 40mm wall in stead of the 2 inch Hirst art wall.

Image

Image
OldmanWillow AKA OldEnt. Customer and fan from 1996 onward!

Post Reply

Return to “Non-Gaming Talk”

Who is online

Users browsing this forum: No registered users and 16 guests